Free Ballistic Tool

Bullet Stability & Sectional Density Calculator

Check stability (Sg) at your actual muzzle velocity and conditions, and get your bullet's sectional density.

Bullet

Rifle

Conditions

Stability (Sg)
1.49

At your velocity and conditions

Verdict
Marginal

Stability

Sg at 2,800 fps, standard air1.51
Velocity correction× 0.988
Twist needed for Sg 1.51:8.0"
Bullet length5.42 calibers

Sectional density

Sectional density0.287 lb/in²
ClassMedium-high: suits elk-sized game

Take this solver to the range — works 100% offline

Save your rifles and loads once, pull live weather or pair a Kestrel, and get instant elevation and wind holds with zero cell service.

Download the App

Free on iPhone and Android. Your website inputs are not automatically imported into the app.

Choosing a barrel? The twist rate calculator shows the twist your bullet needs.

How this calculator works

Sg starts from the Miller twist rule using bullet weight, diameter, length and twist. It is then corrected for temperature and station pressure, and multiplied by (velocity / 2,800)^(1/3). Sectional density is weight in grains ÷ 7,000 ÷ diameter².

Worked example: A 140 gr, 0.264 in bullet: 140 ÷ 7,000 ÷ 0.264² = 0.287 sectional density. At 2,700 fps the velocity correction is (2,700 / 2,800)^(1/3) ≈ 0.988, so Sg drops by about 1.2% compared with the 2,800 fps reference.

Get the full solver in your pocket

Atlas Ballistics runs this same engine on your phone — with wind, spin drift, Coriolis, aerodynamic jump, truing from real shots, saved rifle and ammo profiles, and range cards that work offline.

Download the App

Free to start · No account required to calculate

Frequently asked questions

Aim for an Sg of 1.5 or more. Between 1.3 and 1.5 the bullet usually flies, but it is marginal and can lose accuracy and BC, especially in cold, dense air. At 1.3 or below, treat it as unstable.

A faster bullet spins faster through the same twist, so it has more gyroscopic stability. Miller's rule corrects for this with the cube root of velocity divided by 2,800 fps. Going from 2,800 to 2,400 fps cuts Sg by about 5%.

Sectional density is bullet weight in pounds divided by diameter squared. Higher numbers mean a longer, heavier bullet for its caliber, which tends to penetrate deeper. Roughly 0.2 suits deer and 0.25 or more suits elk.

No. BC also depends on bullet shape, so two bullets with the same sectional density can have very different BCs. Sectional density only looks at weight and diameter.

The twist rate calculator gives standard-atmosphere stability exactly as the Atlas app calculates it, with no velocity term. This page adds Miller's velocity correction and sectional density for a specific load.

More free ballistic calculators

All free, all in the browser, no download needed.