MOA to MIL & MIL to MOA Calculator
Convert MOA to MIL, MIL to MOA, MIL to inches or MOA to inches at any distance — and get the exact number of clicks to dial on your turret.
Correction
Uses true MOA (1.047 in per 100 yd), not the rounded 1-inch approximation. Results update as you type.
Clicks to dial
At 100 yards
Take this solver to the range — works 100% offline
Save your rifles and loads once, pull live weather or pair a Kestrel, and get instant elevation and wind holds with zero cell service.
Download the AppFree on iPhone and Android. Your website inputs are not automatically imported into the app.
Sight-In Scope Click Calculator
Zeroing your rifle on paper? Enter your target distance and where your group hit relative to the bullseye to get the exact turret clicks to bring your impact to center.
At 100 yards, 1 click moves point of impact 0.262 inches. Dial whole clicks, then confirm on paper.
MOA and MIL to inches, without the confusion
Both units are angles, not lengths. That is the whole idea: an angular correction works at every distance, so 2 MOA of elevation is 2 MOA whether the target is at 200 yards or 900. What changes is how much ground that angle covers when it reaches the target.
A minute of angle is one sixtieth of a degree, which works out to 1.047 inches per 100 yards. A milliradian is one thousandth of a radian, which covers 3.6 inches per 100 yards, or a tidy 10 cm at 100 metres. That metric neatness is why MIL took over in precision rifle circles.
The practical mistake is mixing systems. A MIL reticle on a MOA turret means every hold you read has to be converted before you dial it, which is exactly the sort of arithmetic that goes wrong under a timer. Match the reticle to the turret and the problem disappears.
MOA and MIL conversion chart
1 MIL = 3.438 MOA, and 1 MOA = 0.291 MIL. Inches covered by one unit at each distance:
| Distance | 1 MOA | 1 MIL | 1/4 MOA click | 0.1 MIL click | Convert |
|---|---|---|---|---|---|
| 100 yd | 1.05" | 3.60" | 0.26" | 0.36" | |
| 200 yd | 2.09" | 7.20" | 0.52" | 0.72" | |
| 300 yd | 3.14" | 10.80" | 0.79" | 1.08" | |
| 400 yd | 4.19" | 14.40" | 1.05" | 1.44" | |
| 500 yd | 5.24" | 18.00" | 1.31" | 1.80" | |
| 600 yd | 6.28" | 21.60" | 1.57" | 2.16" | |
| 800 yd | 8.38" | 28.80" | 2.09" | 2.88" | |
| 1000 yd | 10.47" | 36.00" | 2.62" | 3.60" |
How this calculator works
One MOA is 1/60 of a degree, which is 1.047 in at 100 yd. One mil is 1/1000 of the range, which is 3.6 in at 100 yd. We convert inches to angle at your distance, then divide by your turret click value to get clicks.
Worked example: 3 MOA at 600 yd is 3 × 1.047 × 6 ≈ 18.8 in. That same 18.8 in is 18.8 ÷ (3.6 × 6) ≈ 0.87 mil, or about 9 clicks on a 0.1 mil turret.
Get the full solver in your pocket
Atlas Ballistics runs this same engine on your phone — with wind, spin drift, Coriolis, aerodynamic jump, truing from real shots, saved rifle and ammo profiles, and range cards that work offline.
Download the AppFree to start · No account required to calculate
Frequently asked questions
More free ballistic calculators
All free, all in the browser, no download needed.
Ballistic Calculator
Full trajectory table with drop, drift, velocity and energy.
Ballistic Coefficient Calculator & Chart
Estimate effective G1/G7 BC, inspect form factor, and browse bullet reference values.
Muzzleloader & Airgun Calculator
G1/G7 trajectory estimates with specialty-projectile model limitations.
Bullet Energy Calculator
Kinetic energy downrange, against hunting thresholds.
MOA to MIL Calculator
Convert MOA, MIL and inches, and get your scope clicks.
Twist Rate Calculator
Miller stability factor and the twist your bullet needs.
Bullet Stability Calculator
Sg at your velocity, plus sectional density.
Recoil Calculator & Chart
Free recoil in foot-pounds and side-by-side cartridge recoil chart.
Angle Shot Calculator
Uphill and downhill range correction with the cosine rule.
Grains to Grams
Convert bullet and powder weights both ways.
Density Altitude Calculator
Temperature, pressure and humidity turned into density altitude.
MPBR & Optimal Zero
Find a suggested zero and point-blank range for your target-zone size.
Zero Calculator
Sight in at 25 yd for a 100 yd zero, and compare 36, 50 and 100 yd zeros.