Free Ballistic Calculator: Bullet Drop, Wind Holds & Ballistic Tables
Calculate bullet drop, wind drift, velocity and energy with G1/G7 drag models. Get MOA and MRAD holds in a free 100–1,000 yard ballistic table.
Factory-equivalent examples are starting points, not measured data for your rifle. Edit velocity and BC to match your ammunition.
6.5 Creedmoor · 140 gr ELD Match
2710 fps · 140 gr · G7 0.315 · 100 yd zero · 1.75 in sight height
59°F · 29.92 inHg station pressure · 0 ft · 0% humidity · wind 10 mph from 90°
| Range (yd) | Path (in) | MOA | MIL | Elev clicks (0.1 MIL) | Wind (in) | Wind MIL | Wind clicks (0.1 MIL) | Velocity (fps) | Energy (ft-lb) | TOF (s) |
|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 0.0 | 0.00 UP | 0.00 UP | 0 UP | -0.5 | 0.15 RIGHT | 1 RIGHT | 2567 | 2049 | 0.11 |
| 200 | -3.5 | 1.69 UP | 0.49 UP | 5 UP | -2.2 | 0.31 RIGHT | 3 RIGHT | 2429 | 1834 | 0.23 |
| 300 | -13.0 | 4.12 UP | 1.20 UP | 12 UP | -5.1 | 0.47 RIGHT | 5 RIGHT | 2294 | 1637 | 0.36 |
| 400 | -29.0 | 6.92 UP | 2.01 UP | 20 UP | -9.3 | 0.65 RIGHT | 6 RIGHT | 2165 | 1457 | 0.50 |
| 500 | -52.5 | 10.02 UP | 2.91 UP | 29 UP | -14.9 | 0.83 RIGHT | 8 RIGHT | 2039 | 1293 | 0.64 |
| 600 | -84.3 | 13.41 UP | 3.90 UP | 39 UP | -22.2 | 1.03 RIGHT | 10 RIGHT | 1918 | 1144 | 0.79 |
| 700 | -125.6 | 17.13 UP | 4.98 UP | 50 UP | -31.1 | 1.23 RIGHT | 12 RIGHT | 1801 | 1008 | 0.95 |
| 800 | -177.6 | 21.20 UP | 6.17 UP | 62 UP | -41.9 | 1.46 RIGHT | 15 RIGHT | 1686 | 884 | 1.12 |
| 900 | -241.9 | 25.66 UP | 7.47 UP | 75 UP | -54.8 | 1.69 RIGHT | 17 RIGHT | 1575 | 772 | 1.31 |
| 1000 | -320.2 | 30.58 UP | 8.89 UP | 89 UP | -70.1 | 1.95 RIGHT | 19 RIGHT | 1467 | 669 | 1.51 |
Positive path is above the line of sight; negative is below. Clicks are rounded to the nearest click. Wind assumes the entered steady wind. Verify velocity, zero and corrections against real impacts before using a calculated table.
Compare with another load
Uses the same zero, sight height, weather, wind and barrel length as your load.
Factory-equivalent examples are starting points, not measured data for your rifle. Edit velocity and BC to match your ammunition.
Take your load data to the range
Save this load once in the free Atlas app and get your holds at the bench with no cell service.
Download the AppEnter muzzle velocity, bullet weight, a matching G1 or G7 ballistic coefficient, zero distance and sight height to calculate your predicted trajectory. Adjust weather and wind for your conditions, then select Calculate trajectory.
The free web table covers 100–1,000 yards and reports drop, wind drift, velocity, energy and time of flight. Calculations run on the server using the Atlas trajectory engine; there is no 500-yard paywall.
Treat every prediction as a starting point. Confirm your zero and impacts at known distances before relying on the result.
What Is a Ballistic Calculator and How Does It Work?
A ballistic calculator predicts a projectile’s flight from muzzle velocity, bullet weight, ballistic coefficient, zero distance, sight height and atmospheric conditions. This web tool uses numerical trajectory integration with G1 or G7 reference drag curves. Its table reports calculated drop, wind drift, retained velocity, kinetic energy and time of flight.
Use the BC value published for the selected drag model. A G1 number is not interchangeable with G7. Predictions depend on the quality of your inputs; confirm them against measured impacts rather than treating the table as a guarantee.
Bullet Drop for Your Exact Cartridge
For a quick bullet drop number for a specific cartridge, see the ballistics chart for your cartridge. Need retained energy instead? Use the dedicated bullet energy calculator, which shows muzzle and downrange energy in ft-lbs at every range.
Understanding Your Ballistic Table: Drop, Wind Drift & Holds
Drop in the table is measured from the line of bore extended, not from the line of sight. At your zero range, the bullet's path crosses the line of sight; the drop column will show a value near zero at that distance (residual inches from the bore offset, not from the crosshair). Beyond zero, drop increases with gravity and drag. Do not confuse raw drop with the hold, your hold is the angular correction required to bring the bullet back to point of aim, which is what the MOA and MRAD columns express.
MOA vs MRAD: 1 MOA equals approximately 1.047 inches at 100 yards, most shooters round to 1 inch per 100 yd for field math. 1 MRAD equals exactly 3.6 inches at 100 yards, or 36 inches at 1000 yards. Match your output units to your scope's turret graduation. If your scope clicks in 0.1 MRAD increments, use the MRAD column. If it clicks in ¼ MOA, use MOA. Mixing systems causes errors.
Wind holds require knowing the effective wind value based on clock angle. Use cosine of the wind angle off the bore line as the multiplier:
- 12 or 6 o'clock (headwind or tailwind): zero value
- 3 or 9 o'clock (full crosswind): full value (multiplier = 1.0)
- 1:30, 4:30, 7:30, 10:30 (45° oblique): approximately half value (multiplier ≈ 0.71)
Time of flight is the correct multiplier for wind sensitivity, a bullet that spends more time in the air is subject to more wind impulse regardless of its remaining energy. A slower, heavier bullet may retain more energy at impact but drift more in wind than a faster, lighter one.
Worked example, 6.5 Creedmoor, 140 gr Berger Hybrid, G7 BC 0.315, 2700 fps MV, 100 yd zero, 10 mph 90° crosswind, 500 yd target: The calculator should return approximately 44 inches of drop (~8.4 MOA / ~2.4 MRAD) and approximately 11 inches of wind drift (~2.1 MOA / ~0.6 MRAD). Run those inputs above to verify against your specific atmospheric conditions. These are modeled values, field truing against actual impacts is essential before trusting any solution at distance.
Truing Your Ballistic Solution: Why Calculated Drop Rarely Matches Real Life
Manufacturer-published BC values are almost universally optimistic. They are typically measured at short range, averaged across a wide velocity band, and tested under controlled conditions that do not match your barrel, your lot of ammunition, or your environment. The result: at 600 yards the predicted drop may be 2–4 inches high relative to actual impact, and at 1000 yards that error can exceed 10 inches, well outside a 10-inch steel plate.
Truing is the process of correcting your ballistic solution against real-world impacts. There are two methods:
- BC truing: Hold muzzle velocity fixed at your measured or chronographed value and adjust BC until the predicted drop matches observed impact at a known distance. This is appropriate when you have confidence in your MV measurement.
- Velocity truing: Hold BC fixed (ideally a Doppler-derived value) and adjust MV until the curve fits. This is appropriate when your MV is less certain than your BC.
The two corrections shift the trajectory curve differently. BC truing changes the shape of the drop curve, the effect compounds with range. Velocity truing shifts the curve more uniformly. In practice, most shooters apply a velocity correction because it is numerically simpler, but BC truing is more physically accurate when using radar-verified drag data.
Always true at the longest range you can shoot, not at 100 yards. A 100-yard group tells you almost nothing about the shape of your trajectory curve, the errors are too small to distinguish from dispersion. Shoot at 500, 800, and 1000 yards, record actual vs. predicted, and back-calculate your correction.
Doppler radar-derived BCs, available from sources like Hornady's 4DOF data or manufacturer radar campaigns, are the best starting point because they capture the actual drag curve across the entire velocity envelope rather than a single averaged BC.
Atlas Ballistics includes a built-in truing workflow: log actual impacts from your shot log, compare to the predicted solution, and the app auto-corrects BC or MV across the full range card. That closes the loop between the table and the target. Download Atlas Ballistics to run your truing workflow at the range, not back at the desk.
Atmosphere & Density Altitude: Why Conditions Change Everything
Density altitude (DA) is the single number that encapsulates the combined effect of elevation, temperature, and barometric pressure on air density. Higher DA means lower air density, which means less drag, bullets fly flatter and faster than at sea level standard conditions.
A load zeroed at sea level on a standard day will strike high at elevation because the bullet experiences less drag deceleration. The magnitude is not trivial: the same load with a 100-yard zero, comparing sea level to a 5000-foot density altitude, can differ by more than 2 MOA at 800 yards. In practical terms, that is 16 inches at distance, a clean miss on an 18-inch plate and a likely wound rather than a clean kill on game.
The calculator asks for altitude, temperature, and barometric pressure separately because DA is derived from all three. If you enter only altitude, you are assuming standard temperature and pressure for that altitude, an assumption that fails in summer heat, approaching weather systems, or high-pressure ridges. Enter all three for an accurate atmospheric correction.
Humidity has a counterintuitive effect: humid air is slightly less dense than dry air at the same temperature and pressure, because water vapor (molecular weight 18) displaces heavier nitrogen (28) and oxygen (32) molecules. The practical effect on trajectory is small, typically less than 0.5 MOA at 1000 yards, but it operates in the direction opposite to what most shooters assume. The calculator accounts for it when you enter relative humidity.
Using ICAO standard atmosphere (the default) is appropriate for building a baseline DOPE card or comparing loads on paper. For any field application, a PRS stage, a hunting shot in the Rockies in August, or a match at altitude, override all three atmospheric inputs with actual conditions. The fields are there for exactly that purpose.
Ballistic Calculator for Hunting vs. Long-Range Competition: Different Priorities
For hunting, use measured velocity and verified zero, then check predicted impact velocity against the bullet manufacturer’s guidance. Energy alone does not determine terminal performance, and this calculator does not determine a safe or ethical maximum hunting distance.
For target shooting, use the MOA or MRAD hold that matches your scope and account for changing wind and atmosphere. Small input errors become more important as range increases.
The Atlas mobile app adds range workflows such as saved profiles, truing and range cards. The web tool is free; its displayed 100–1,000 yard table is not locked behind an app download.
Frequently Asked Questions
See the FAQ section below for answers to the most common questions about ballistic calculators, drag models, and getting an accurate firing solution.
Take the Firing Solution to the Range
This tool gives you the table. Atlas Ballistics gives you the solution in your pocket, on the mountain, at the stage, or behind the gun when conditions change. The app runs a full 6DOF solver with spin drift, Coriolis, and aerodynamic jump; pulls GPS-linked density altitude automatically from your device sensors; walks you through a built-in truing workflow tied to your shot log; and generates stage cards for PRS and NRL competition. This tool will get you on paper. Atlas will get you in the X-ring.
Frequently asked questions
Keep reading
Muzzleloader & Airgun Ballistic Calculator
Best Rangefinders with Ballistic Calculator: 2026 Buyer's Guide
Best Ballistic Calculator in 2026: Apps, Software & Handheld Devices Compared
Berger & Vortex Ballistic Calculator – The Atlas Alternative for Precision Shooters
Ammo Brand Ballistic Calculators Compared: Federal, Remington, Winchester & More
Best Ballistic Calculator Apps in 2026: An Honest Comparison for Precision Shooters
More free ballistic calculators
All free, all in the browser, no download needed.
Ballistic Calculator
Full trajectory table with drop, drift, velocity and energy.
Ballistic Coefficient Calculator & Chart
Estimate effective G1/G7 BC, inspect form factor, and browse bullet reference values.
Muzzleloader & Airgun Calculator
G1/G7 trajectory estimates with specialty-projectile model limitations.
Bullet Energy Calculator
Kinetic energy downrange, against hunting thresholds.
MOA to MIL Calculator
Convert MOA, MIL and inches, and get your scope clicks.
Twist Rate Calculator
Miller stability factor and the twist your bullet needs.
Bullet Stability Calculator
Sg at your velocity, plus sectional density.
Recoil Calculator & Chart
Free recoil in foot-pounds and side-by-side cartridge recoil chart.
Angle Shot Calculator
Uphill and downhill range correction with the cosine rule.
Grains to Grams
Convert bullet and powder weights both ways.
Density Altitude Calculator
Temperature, pressure and humidity turned into density altitude.
MPBR & Optimal Zero
Find a suggested zero and point-blank range for your target-zone size.
Zero Calculator
Sight in at 25 yd for a 100 yd zero, and compare 36, 50 and 100 yd zeros.