Free Ballistic Tool

Muzzleloader & Airgun Ballistic Calculator

Estimate muzzleloader and airgun trajectories with a G1/G7 calculator. Enter measured velocity and matching BC; understand specialty-projectile limitations.

Factory-equivalent examples are starting points, not measured data for your rifle. Edit velocity and BC to match your ammunition.

Weather and wind

Current assumptions: 59°F, 29.92 inHg station pressure, 0 ft, dry air. Wind: 10 mph from 90°. Pressure is local station pressure, not a sea-level weather report. Weather-app pressure is usually adjusted to sea level and is not always an airport altimeter setting; convert it with the density altitude calculator.

Estimated velocity from your barrel: 2710 fps (25 fps per inch). Factory velocities are usually from a 24 in test barrel. A chronograph reading beats this estimate: enter it as muzzle velocity and set both lengths the same.

Compare with another load

Uses the same zero, sight height, weather, wind and barrel length as your load.

Factory-equivalent examples are starting points, not measured data for your rifle. Edit velocity and BC to match your ammunition.

Take this solver to the range — works 100% offline

Save your rifles and loads once, pull live weather or pair a Kestrel, and get instant elevation and wind holds with zero cell service.

Download the App

Free on iPhone and Android. Your website inputs are not automatically imported into the app.

Elevation
2.9 MIL UP
Wind
0.8 MIL RIGHT

Use the shared G1/G7 trajectory calculator to explore muzzleloader and airgun loads when you have a suitable ballistic coefficient and measured muzzle velocity. Enter your projectile weight, sight height and zero, then set weather and wind.

This page does not provide dedicated projectile tabs, a GL pellet model, an arrow drag model, automatic truing or regulation checks. G1/G7 predictions can be unreliable for projectiles whose drag differs from the reference shape. Confirm predictions at actual shooting distances.

Choosing a drag model for your projectile

Use the drag model that matches your published BC. G1 is commonly supplied for traditional muzzleloader bullets and some airgun projectiles. A G1 value must be entered as G1, not G7.

Round balls, diabolo pellets and arrows do not share the same drag shape as a conventional rifle bullet. A measured BC may approximate part of the flight, but a single number need not fit the whole velocity interval. This calculator has G1 and G7 selections only; it does not implement a dedicated pellet or arrow model.

Entering muzzleloader and airgun data

Use measured muzzle velocity for your actual projectile, firearm or airgun. Enter projectile weight in grains, zero distance in yards and sight height in inches. The web inputs accept BC values from 0.01 to 2. Use a suitable published value for your projectile and velocity interval rather than copying a BC from a different shape or caliber.

The shared output table displays 100–1,000 yard rows. Those distances do not imply your setup is suitable for them; the table may not cover the short-range increments needed for a pellet or low-velocity projectile. A dedicated specialty solver may be more appropriate.

Reading drop, velocity and energy responsibly

Drop is predicted relative to the selected zero and line of sight. Wind drift depends on the entered wind direction and speed. Energy is calculated from projectile weight and retained velocity; it is not a guarantee of penetration or terminal performance.

This tool does not supply powder-charge recommendations, hunting-regulation validation or a safe maximum range. Use manufacturer loading guidance, check applicable regulations, and confirm your setup at the distances where you intend to shoot.

Take Your Firing Solution to the Range

The calculator on this page generates a static range table, accurate for planning, but static atmospheric inputs do not account for the conditions you actually shoot in. Atlas Ballistics for iOS and Android reads barometric pressure and temperature from your phone's onboard sensors in real time, logs each shot so you can true your BC across multiple range sessions rather than relying on a single cold-bore group, and stores separate projectile profiles for every platform you shoot, muzzleloader, airgun, and centerfire in one place. If you hunt or compete across platforms or in variable weather, the app gives you a defensible firing solution, not a best guess from last Tuesday's forecast.

Frequently asked questions

You can enter measured velocity, projectile weight and a matching G1 or G7 BC. Results are estimates and depend on how closely the reference drag model fits your projectile. Confirm zero and impacts with your actual load.

No. The available drag selections are G1 and G7. A diabolo pellet can differ substantially from those reference shapes; use suitable measured data and a dedicated pellet solver when needed.

There is no dedicated arrow drag model or crossbow tab. Do not treat a generic G1/G7 prediction as validated arrow trajectory or hunting advice.

The shared trajectory table displays 100–1,000 yard rows. It does not provide short-range specialty increments, and the listed distances are not recommendations for your projectile or setup.

Keep reading

More free ballistic calculators

All free, all in the browser, no download needed.